Forum : 0 member | Your status : Not Connected!
Terratec Phase 22 problem..
[ Terratec Phase 22 ]
[ Terratec Phase 22 ]
Page : 1 2 
Posts
Angor
9 posts | 11 Posted on 10/06/2007 at 13:37 Jet another problem. God I hate Phase 22. A friend of mine has the next problem: You can try to connect any instrument in the inputs an you will get nothing, Nadia, no SOUND NO HUM NO NOTHING. If the inputs are blown up there will logicaly be hum LOTS AND LOTS OF HUM. HELP before i break the hell out of her. | ||
sami
1 posts | 12 Posted on 10/30/2007 at 02:23 help me of recorder vocal EQ settings what? | ||
gmcintosh
2 posts | 13 Posted on 02/26/2008 at 03:28 Followup to my earlier post. I contacted Terratec support with all the info and several weeks later I got a response to say that it was likely that the quartz clock on the card was damaged. I'm assuming this is terminal, and therefore expensive. I can think of only one situation that might have done this. While pushing a cable into to the card with the computer running the clip securing the card in the PCI slot 'let go' (the card wasn't screwed in in this particular box) and the card basically half ejected from its slot (yes, with the computer running) so that half the pins were still connected and half were in mid air. This is obviously bad, and to be avoided at all costs (and marked the last time I relied on clips to hold PCI cards in place), but is this kind of thing actually likely to trash a card? I can't be sure but it does seem likely that things started to go wrong from about here. It's just strange that the card works perfectly with a reinstall for a few days, then the slowdown symptons kick in again rendering it useless. Glenn | ||
miller64917
2 posts | 14 Posted on 03/25/2008 at 02:35 I had the same problem, Thanks for your follow ups, maybe this will solve my similar problem. _______________________________ Specialty Truck Financing |
Page : 1 2 
